Personal Water Craft Forum banner
1 - 2 of 2 Posts

· Registered
3,032 Posts
Yea you can get a cheap gauge at Harbor Freight or borrow/rent one from an auto parts store. Pull the plugs, screw in the gauge and crank the engine (pinch off the fuel line so you don't get gas flying all over). Usually you want it to be around 120 and within 5% or so between the cylinders.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.