Personal Water Craft Forum banner

Question about steering

7241 Views 4 Replies 3 Participants Last post by  nick28
I just bought a 2007 Yamaha VX sport. The handle bars seem to have too much play but I am not sure. I can move the whole steering column up and down about 1/2-3/4 inch. Is this normal? If not what part needs to be replaced?
1 - 2 of 5 Posts
Probably just need to tighten a few screws........either where the handle bar attaches or the base of the column.
I would guess it is just loose not broken. On my brothers VX the steering is pretty tight (maybe 1/8" movement at the most). You will have to take the steering column apart to know for sure. I don't have a service manual for the VX, but here are a couple of parts diagrams that might help:
Yamaha Waverunner Parts 2007 VX1100CF - WAVERUNNER VX SPORT STEERING 1 Diagram
Yamaha Waverunner Parts 2007 VX1100CF - WAVERUNNER VX SPORT STEERING 2 Diagram
1 - 2 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top