Personal Water Craft Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
811 Posts
In regards to pre-mixing oil vs oil injection. Oil injection is always better for at least two reasons. The only time you need a 50:1 oil ratio is at maximum throttle. For instance at an idle the oil pump is probably mixing oil at 100:1. So 50:1 at an idle it will use more oil and foul more plugs. I also would be concerned about the battery.:rolleyes:
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top