Personal Water Craft Forum banner

Rebuilding Carbs

2766 Views 5 Replies 4 Participants Last post by  beerdart
What's the difficulty ( 1 to 10) in rebuilding the carbs on my 96 780 SLX. I've rebuilt quadrajets when I was younger, never tackled watercraft or motorcycyle carbs. Rating 1 as easy , 10 as difficult. Also, where should I buy my rebuild kits if I try myself.
1 - 6 of 6 Posts
rating

I'd give a Quadrajet a 6 rating a Holley a 5 and your carb a 1.5 they are cake!! just get a pop off tester so you can dial it in correctly! Z
Yes they are easy to rebuild. Best advice is to have a manual impact wrench handy. It is far worse to remove the carb rack than the rebuilding.
Now I need to figure whick kits I need,

Kinda funny how many jr members there are..

Thanks for all the info and replies
rayk said:
Now I need to figure whick kits I need,

Kinda funny how many jr members there are..

Thanks for all the info and replies
Gasket Technology Mikuni 38/44/46 Super BN Carb Rebuild Kit - 9262
or
Mikuni 38/44/46 Super BN Carb Rebuild Kit - 39-903
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top