Personal Water Craft Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
26 Posts
Drain all the fuel!!!! don't bother with the additves- they are nothing but a headache!! at least drain as much fuel as you can and then add high octane fuel to the tank! and if you want to add some kinda treatment then go for it- but don't add it to a tank of bad fuel!- it would be best to take the carbs apart and clean out the jets and reinstall- run a pin threw them and spray the inside with carb cleaner and it should be fine
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top