Personal Water Craft Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
10 Posts
I have the EXACT same problem. I have tried everything. PLEASE PLEASE Let me know if you find the solution to your problem.


I have clipped plug boots changed plugs cleaned and checked connections in ebox tightened and cleaned any wires that looked crappy. All 3 cylinders at 125 and I took heads off all look perfect. I have replaced the reeds checked the stator wires back for continuity, forced the temp sensor to put ski in limp mode, (totally different sound and runs at like 1000 RPM) Replaced entire electrical box ( Coils, CDI and anything else in there), changed start relay cause i broke the other one while working on it, changed exhaust hose that seemed to collapse on itself under load and quick throttle, STILL no fix. This is unreal. I have cleaned carbs and don’t see issue there. Replaced Reeds/Cages/Gaskets.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top