Personal Water Craft Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
Wanted to get some thoughts from you folks before I dig into this. I had the ski moored and it broke away from its tether in high waves and beached itself. The waves crashed over it and filled the hull with saltwater. We drained the hull, pulled the plugs and found no water at all, took the carb cover off and drained the carbs which were full of water. Spayed the carbs with starter fluid and checked the electronics box and found no water.

I let it dry for a day and tried starting it. It would turn over but wouldn't fire.

What should my next steps be?

Thanks in advance for any advice.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top