bought this used waverunner 3 . was told it was a 1997 750cc but dont think this is correct. can anyone tell me a way to find out exactly what i have. I want to replace the impleller and housing to get the better performance. need to know which parts i need. Any help is much appreciated
tell me how to find out the model of my waverunner 3
Join the discussion
Recommended Reading
-
power loss!
General PWC & Jetski DiscussionI have a 2015 yamaha vx1100 waverunner. It is the base model. I can't get it to go over 30mph. I have cleaned the fuel injectors,airbox,changed the spark plugs. The impeller is clean. Even took out the air resistor in the intake. Any suggestions. I was told that rhing should go 50 to 60 mph.- 0
- 21
-
Sarbopey4 · updated
-
New Motor For 97 waverunner
General PWC & Jetski DiscussionI am in search of a new motor for 97 triple 1100 ski. Cylinder 1 blew through crankcase, and cylinder wall is shot. Any ideas for best fix, or just need a new motor? And if so SBT is nice, but too expensive for machine.- 1
- 56
-
TCNY315 · updated
-
How to tow wakeboard/kneeboard with yamaha 650 vxr? Ski Pole?
General PWC & Jetski DiscussionDo they make universal ski poles? There is a hole in the back which looks like it would be for a ski pole of some sort. I have a 91 yamaha waverunner 650 VXR. Thanks for any help!- 1
- 36
-
FultonD33 · updated
-
1996 wave raider 1100
General PWC & Jetski DiscussionHaving issues rode it for couple hours ran great all of sudden it died, then it fired back up again took it back out died again now all of sudden i have no spark checked the black white wire unplugged it nothing still no spark any ideas where to start?- 0
- 31
-
Justinshelly1 · updated
-
2006 aquatrax f12x
General PWC & Jetski DiscussionHi, I am new to the forum, I have a 2006 Honda aquatrax f12x, the jet ski does not work well and the rpm is not stable, they change the fuel regulator, the map sensor, the air temperature sensor, the compression in all the cylinders is in more than 150, the gasoline is fresh, sometimes in the...- 0
- 28
-
Hanoi31 · updated
Join now to ask and comment!