Personal Water Craft Forum banner
1 - 2 of 2 Posts

·
BORN TO FISH NOT CATCH
Joined
·
1,509 Posts
I did it the opposite way. On my '96 Monte Carlo, I pulled the pump, driveshaft, removed the back plug; put a chunk of rope into the cyclinder hole to hold the piston in place while I wrenched off the coupler.

that works!:thumbsup:
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top