I'm trying to install a trim system from a 97 zxi1100 into a 96 zxi900. One of the wiring harness plugs is a little different and it is not just a plug & play deal. It would be easy to rectify except the 96 has a 5 wire plug and the 97 has a 4 wire plug. Two of the 96's wires are spliced together internally, which really makes it a 4 wire but color coding doesn't match up. Anyone ever come across this problem? / dp
Trim Swap
Join the discussion
Recommended Reading
-
2008 STX-15F overheating issue
Kawasaki JetskiGreetings All, I am having a strange issue with my 2008 Kawasaki STX-15F Jetski; when I go to run it in the morning; it runs great, and there is water coming out of the cooling port; after running it for about 1/2 - 1 hr, and run at idle, like I would do to dock it, steaming hot water spits out...- 1
- 2K
-
2005 stx1500 kawasaki jet ski ski will only go to 5200 rpm
Kawasaki JetskiHello all: I have wrote a few post on this subject. I have some new thoughts on this. I have now replaced every input signal device that the ski has with the exception of TP sensor, but have metered it out and it says it good, replaced all injectors, all fuel lines and filter. Also stupid I...- 0
- 315
-
Ultra 150 oil injection system
Kawasaki JetskiI have an 2000 Ultra 150, I assume same motor as 2000 STX. I always premix about an ounce of oil to the gallon in addition to the what is provided by the oil pump, just for insurance when running at high rpm, because I understand the pump to be variable with speed but I worry about it providing...- 1
- 180
-
750 exhausts
Kawasaki JetskiI am trying to get a green/big pin 750 engine going in a Sport Cruiser... I previously had small pin installed but blew it up. Trying to sort out the exhaust and need some help. I just purchased a green 750 exhaust manifold on ebay and when I got it home realized the opening to the head tube is...- 3
- 150
-
nichdiep · updated
-
2000 kawasaki 1100 stx di oil flooding cylinders
Kawasaki JetskiMy dad bought his PwC brand new and right now it's only got 15hrs on it. He parked it years ago because when you try to crank it, the plugs foul out because the cylinders get flooded with oil and then it wont even spin over. To get it to spin over again, you have to pull the plugs and get the...- 11
- 565
Join now to ask and comment!