Personal Water Craft Forum banner

Trouble with misfireing or cutting out

2729 Views 2 Replies 3 Participants Last post by  JUST-IN-TIME
anyone that can help with possible ideas or ways to find out why my1100 is missing or cutting out under accel. it is hard to start pretty much every time. i have put new plugs in and ran 91 octane.
thanks.
1 - 3 of 3 Posts
Could be either the coil or the plug wires breaking down. You also need to check your stator coils.

Do you have a Clymer's or shop manual? That would help you alot...
turtle1100 said:
anyone that can help with possible ideas or ways to find out why my1100 is missing or cutting out under accel. it is hard to start pretty much every time. i have put new plugs in and ran 91 octane.
thanks.

get a shop manual first
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top