Personal Water Craft Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
I have a 2006 VX110 sport. Whenn started, the warning light and buzzer come on almost immediately and the check engine icon fashes. The ski will only go about 7 knots. Cooling water is not flowing out the port on the front left of the ski. I have check the input strainer by the pump and it is clear. I pulled some hoses and verified that water flows from the y connector out the rear thru the inpur strainer. I connected the water line from the y connector (bottom of the flush line) to the front of the ski and started the motor. Still no water thru the output port on front left side. However, the water is coming our near the intake grate (exhaust ?). Any one have any ideas.

Thanks
 

·
Registered
Joined
·
323 Posts
sometimes the water will not come out the front holes unless you have a heap of water pressure. Unless you have blocked a water jacket somewhere with sand (have you ever beached it on sand??). apart from that, change your spark plugs (NEW) and clean the air filter as it is a common problem on yam 4 strokes.
 
1 - 2 of 2 Posts
Top