Personal Water Craft Forum banner

1 - 1 of 1 Posts

27 Posts
Discussion Starter #1
You have to slowly apply throttle and can only go about 1/2 throttle or it bogs out and slows down until it "catches" and you go again.

I have rebuilt the carb including needle and seat

New fuel line from fast flow fuel line

blocked off oil system and removed it (I run 50:1 premix)

Cleaned out petcock valve

New plugs, wires, and ignition coil

the only thing left is the fuel filter which is being replaced tomorrow

Could it be the CDI?

Any help would be greatly appreciated
1 - 1 of 1 Posts