Personal Water Craft Forum banner

Waverunner 800 XLT top end rebuild

2279 Views 0 Replies 1 Participant Last post by  WayneGSpooner
Check your oil lines! The oil feed line to the rear carb on my 2003 XLT came off. Rear piston dry seized. BTW- You cannot see the oil line without removing the exhaust box. Rear cylinder is scored and the piston holed. Is it practical to bore and sleeve the rear cylinder only, or do I need to rebuild both? The front cylinder and piston are in excellent shape.

Anyone had this experience?

1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.