Personal Water Craft Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
11 Posts
Things to check/replace in order of difficulty:
1) Crease on plastic carburator pump valve (about $1) - leaky valve = lean mix at high speed = piston seize
2) Intake reed valves ($25) - leaky reeds = lean mix......
3) Twisted crank ($$$) - twisted crank = premature detonation in #3 = high heat = piston seize
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top