you can just gravity feed
then i would disconnect every hose and let drain
then i would disconnect every hose and let drain
Winterizing jetski that wont crank
The 95 polaris 650 std broke down last year like it does every year.
I suddenly quit moving while it was running full speed. The engine was still running fine. Apparently it must be something wrong with the impeller.
I may not find time to work on it prior to the winter time.
So usually I attach a hose to it and gravity feed antifreeze into it while the motor is running. Since I don’t want to run it in this condition can I just gravity feed the antifreeze into it with out running it or will this not circulate the antifreeze to where it needs to be and be the end of the machine?
Dave
I suddenly quit moving while it was running full speed. The engine was still running fine. Apparently it must be something wrong with the impeller.
I may not find time to work on it prior to the winter time.
So usually I attach a hose to it and gravity feed antifreeze into it while the motor is running. Since I don’t want to run it in this condition can I just gravity feed the antifreeze into it with out running it or will this not circulate the antifreeze to where it needs to be and be the end of the machine?
Dave
1 - 2 of 2 Posts
1 - 2 of 2 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Personal Water Craft Forum
A forum community dedicated to PWC owners and enthusiasts. Come join the discussion about performance, modifications, troubleshooting, maintenance, for all SeaDoos, Waverunners, and Jet Skis.
Full Forum Listing
Recommended Communities
