Personal Water Craft Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
I did look for a sticky on winterizing without seeing one, so here I am. I am a new pwc owner and need info on winterizing.

So far I know:
fill up gas tank all the way
add fuel stabilizer
run tap water through system then unhook and exhaust it all out
spray wd40 lightly over engine
spray some wd40 into cylinders
disconnect battery

missing anything?

Also is anyone familiar with the where the water hose hook up is for the 2001 yamaha gp800 series...
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #3 ·
thanks for the reply.

Well I already fogged it with real fogging oil but I did spray the outside of the engine and "prop" with wd40. I also ran it for about 12 minutes with waterhose to flush engine and induce stabilized fuel into carbs and motor.

Is the single spray down with WD gonna hurt it?

Also, is 12-15 minutes too long to run without it being in the water?

Thanks for the help,
Malcolm
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #5 ·
I didn't here any new noises towards the end of my running it so I hope that I didn't hurt anything. I got that useful information from somone else online (flush it for about 10-15 min on the hose to let stabilized fuel through the system). Thanks
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top