Personal Water Craft Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
23 Posts
I put a fuel pressure gauge on the fuel return outlet of the carb, and cranked the engine.
I believe the restrictor that gives you the fuel pressure is inside the carb. If I'm right, then measuring the fuel pressure in the return line isn't going to tell you anything since you are measuring after the restrictor.

John
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top