Personal Water Craft Forum banner
1 - 1 of 1 Posts

· Registered
14 Posts
Discussion Starter · #1 ·
Hey Guys, I Have A Few Posts Out There That Lead To This One. Anyways, I Am Working My 98 Xl 1200 Triple Carb Set Up. Took One Apart Recently And This Is What I Have......

Purchased Rebuild Kits From Sbt. Started The Break Down And Found Small Amounts Of Build Up On The Metal Areas. What Material Should I Use To Clean This, Rag And Carb Cleaner? When Re-assembling, Should I Lube The Insides, I Heard Some Stories. Also He Kit Came With 2 Small Clear Rings, Any Ideas? Thanks Guys.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.