XL800 Oil question | Personal Water Craft Forum

1 - 1 of 1 Posts

ledzeppelin091

·

Registered

Joined Jun 26, 2008

·

3 Posts

Discussion Starter • #1 • Jun 26, 2008 (Edited)

I have a 2000 Yamaha XL800 and have been using Yamalube 2 stroke oil for it. Around here Yamalube goes for around $30 and I saw Pennzoil 2 stroke brand for $13 the problem is it said that it is TC-W3 and i don't know if my XL800 can use tcw3. Heres a link to the product

Products - Synthetic Blend Premium Plus Outboard 2-Cycle Oil

1 - 1 of 1 Posts

Join the discussion

Recommended Reading

Motor Id

Yamaha Jetski

I have a 1998 XL 1200 waverunner and i'm trying to figure out if the motor is a 1200 or a 1200r. I going to set the Popoff pressure on the carbs and the spec pressures are completely different on the two motors.
- 1
- 32
- P
  pikachew · updated 6 h ago
2005 xlt 1200 water in crankcase

Yamaha Jetski

Here is a pic of what I found when i disassembled a XLT1200 recent acquisition. Waverunner has not run since 2016. Don't know the backstory how the water got in, maybe rolled and continued to run? Crank will not spin for obvious reasons. Cylinders were in great shape. Few questions, Is any...
- 5
- 102
- F
  fadagger · updated 1 d ago
2 Non running gp 800s

Yamaha Jetski

So I bought these two yamaha gp 800s yesterday for 400 bucks with a double trailer. The guy that I bought them from said he got them from a buddy back in 2013 and he just said they didnt run. I figured what the heck the trailer is worth the 400 to me. The skis are a 1998 and a 2001. Does anyone...
- 28
- 833
- B
  Branamoia · updated 2 d ago
2014 Yamaha 1.8 HO Cruiser

Yamaha Jetski

While changing the spark plugs preparing my ski for this coming season, I noticed corrosion on each plug between the drive hex and the rubber boot attachment area. What could be the cause? Thank you.
- 6
- 171
- Ray Pollard · updated 3 d ago
'05 gp800r premix conversion and gasket application

Yamaha Jetski

Good day, just acquired new to me 05 gp800r and 05 xlt1200 from a friend who wanted them gone. both with bad top ends. My first two PWC ever, and I'm pushing 50. I'm pretty handy, but no mechanic. Disassembly went very well, straightforward. found problems with low compression. maybe this...
- 11
- 572
- F
  fadagger · updated 7 d ago

Join now to ask and comment!

Top