yamaha controls start and stop switch
1 - 2 of 2 Posts
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
2014 Yamaha 1.8 HO Cruiser
Yamaha JetskiWhile changing the spark plugs preparing my ski for this coming season, I noticed corrosion on each plug between the drive hex and the rubber boot attachment area. What could be the cause? Thank you.- 1
- 57
-
Ray Pollard · updated
-
2 Non running gp 800s
Yamaha JetskiSo I bought these two yamaha gp 800s yesterday for 400 bucks with a double trailer. The guy that I bought them from said he got them from a buddy back in 2013 and he just said they didnt run. I figured what the heck the trailer is worth the 400 to me. The skis are a 1998 and a 2001. Does anyone...- 25
- 782
-
'05 gp800r premix conversion and gasket application
Yamaha JetskiGood day, just acquired new to me 05 gp800r and 05 xlt1200 from a friend who wanted them gone. both with bad top ends. My first two PWC ever, and I'm pushing 50. I'm pretty handy, but no mechanic. Disassembly went very well, straightforward. found problems with low compression. maybe this...- 11
- 537
-
2018 Yamaha VX Cruiser VX1050A - Service Manual
Yamaha JetskiI looked on email and tried to use Google to get the service manual for my 2018 Yamaha VX Cruiser VX1050A without any success. Any suggestions on where I can get this? I am ok with either digital or a physical copies.- 9
- 142
-
2006 VX 110 Deluxe - running like in L Mode
Yamaha JetskiI have a 2006 VX110 Deluxe that I sent to a repairman to replace my Impeller because it was running rough. Just got it back and now it will not go over 5000 RPMs at 7mph. It seems to feel like it is in L Mode, although the L Mode light is not on and when I turn on the ski it only beeps twice...- 0
- 120
-
Khebert · updated
Join now to ask and comment!