Join Date: Jul 2015
Location: slower lower Delaware,second home on lake Conesus in NY. keep a 93&94 vxr pro there.
I use a small screwdriver and get under the inside edge of the seal and pry them out. Just be careful not scratch the seal bore in the jug or you could create an air leak. To install new I use I believe it's a 3/8 drive 7/16 socket and small hammer to drive them in. If I'm correct that socket is just a tad smaller than the outside diameter of the seal.
Last edited by Dave in DE; 04-07-2019 at 07:41 PM.